BC Biomedical IPA-2000S Manual do Utilizador descarregar pdf (Página 145)

6-7

SAFETY ANALYZER AUTO

LINE VOLTAGE CHECK

Line Voltage

To ensure normal operating conditions for the DUT, the

Line Voltage is measured in this step. The display will

indicate if Line Voltage Passed.

(See ALARMS for details if it does not pass).

NOTE:

CThe Line Voltage must be within

+20% to –10% of its rated value.

STEP 4

STEP 5

SAFETY SAFETY

SAFETY

ANAN

ALAL

YZER--AYZER--A

YZER--A

UTUT

OMAOMA

OMA

TIC MODETIC MODE

TIC MODE

RUNNING AN AUTOMATIC TEST

SAFETY ANALYZER AUTO

GND RESIST INVALID

LIMIT 2.00

ΩΩ

Ω

MEASUREMENT --.--

ΩΩ

Ω

Ground Lead Verification

To help confirm the ground lead is properly zeroed and

connected, the ground resistance measurement is

verified in this step. The display will indicate if Ground

Resistance is invalid and will pause the test until the

needed correction is made.

NOTES:

CGround Resistance would be invalid

if:

-the lead is not properly attached to

the DUT

-the lead is still attached to stud

-the test lead is bad or broken

C If the lead is adjusted and the

measurement becomes valid, the test

will continue.

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 161 162

Comentários a estes Manuais

Sem comentários

BC Biomedical IPA-2000S Manual do Utilizador Página 145

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo BC Biomedical IPA-2000S