BC Biomedical ESU-2000 Series Guide Manual do Utilizador descarregar pdf (Página 23)

CUSTOM LOAD SETS – With twelve available loads, there is a possibility of 4096

combinations of resistors to use as a combined load. To simplify the selection of

commonly used load configurations, 10 custom resistor sets are available. Each resistor

set can consist of any combination of the available calibrated loads. The number of loads

and load calibration is performed in the Factory Setup Screen.

A custom load set can be configured in the Setup Screen by either using to

highlight the line and to toggle the available custom set resistance,

or by using the key to access the Custom Resistor Set Menu.

This menu shows the current values of the loads as set in the Factory Setup Screen. The

value of a Load Set can be changed by using to highlight the load line and to

include or remove the resistor from the custom set. The total series resistance of the

selected resistors is shown to aid in customizing the custom resistor set.

NOTE: If individual selected load values are changed in the Factory Setup Screen, the

resistance value of the sets will change accordingly.

The Setup Screen can be exited using the key.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Sem comentários

BC Biomedical ESU-2000 Series Guide Manual do Utilizador Página 23